Call 405-381-4373 Click here to new site www.bestbuymetalproducts.com

Tru-bilt Outdoor Products covering parts of Texas and Oklahoma. Tru-bilt offers corner braces as standard product with J-trim as an option. In areas that are not covered by Tru-bilt, we use other companies. Prices do vary, call our office for a  price quote in your area.
Add $200 for A-Frame style buildings
Add $400 for Flat Welded Trusses

All prices include installation in any of the states we service
numbers shown represent width by length Units longer than 36 ft length can be achieved by placing 2 units "end-to-end" extra charge applies. You can figure any size building using these prices. Print off page for ease! 26 gauge sheet metal is also available. ON 30 WIDES OR WIDER BY TRUE-BILT, DOUBLE BASE TUBES AND DOUBLE LEGS ARE USED PLUS DOUBLE TRUSS CLICK FOR PICTURE.
12 x 20 = $595 12 x 24 = $795 12 x 28 = $995 12 x 32 = $1295 12 x 36 = $1295
18 x 20 = $695 18 x 24 = $895 18 x 28 = $1095 18 x 32 = $1395 18 x 36 = $1395
20 x 20 = $895 20 x 24 = $1195 20 x 28 = $1395 20 x 32 = $1695 20 x 36 = $1695
22 x 20 =$1095 22 x 24 = $1395 22 x 28 = $1695 22 x 32 = $1895 22 x 36 = $1995
24 x 20 = $1295 24 x 24 = $1695 24 x 28 = $1895 24 x 32 = $2095 24 x 36 = $2295
30 x 20 = $2495 30 x 24 = $2895 30 x 28 = $3395 30 x 32 = $3895 30 x 36 = $4395
Add for leg height  5 ft is standard height on regular style unit. Actual sides are about 1 ft taller than the leg height. A-Frame comes standard with 6 ft legs, but that is the actual height. On legs over 7 ft, we recommend adding Power-Bars Click for Picture. They add a lot to the overall structural integrity of the building. Priced at $200
20  ft long
6 ft  $50
7ft   $90
8ft   $130
9ft   $170
10ft  $210
11ft $250
12   $290		 24  ft long
$60
$120
$180
$240
$300
$350
$400		 28  ft long
$65
$130
$195
$260
$325
$380
$325		 32  ft long
$70
$140
$210
$280
$350
$410
$470		 36 ft long
$80
$160
$240
$320
$400
$470
$540

Close both sides 
5 ft    $300
6ft     $350
7ft     $400
8ft     $450
9ft     $500
10ft   $550
11ft   $600
12 ft  $650		 $325
$375
$425
$500
$550
$600
$650
$700		 $350
$400
$450
$550
$600
$650
$750
$830		 $400
$450
$500
$600
$650
$700
$800
$850		 $450
$500
$600
$700
$750
$850
$950
$1050

Close one end (double for front and back)
12 wide
5 ft    $350
6 ft    $400
7 ft   $450
8 ft   $500
9 ft   $550
10 ft $600
11 ft $650
12 ft $700		 18 wide
$450
$500
$550
$600
$650
$700
$750
$800		 20 wide
$500
$550
$600
$700
$750
$800
$850
$900		 22 wide
$600
$650
$700
$800
$850
$900
$950
$1050		 24 wide
$650
$700
$750
$850
$900
$1000
$1100
$1200		 30 wide
6ftstandard
$900
$950
$1050
$1200
$1350
$1500
$1650

Welded Trusses $700 (has standard 6 ft legs)

Partial Gable add $150 up to 24 wide

Roll up
door sizes available (width x height)

Power Bars
$200

Walk through doors available
 8 x 7 = $ 325  8 x 10 = $ 375

extra metal
20 ft sheet   $80
24 ft            $95
28 ft           $105
32 ft           $130
$36 ft         $145

 3 ft door $185 4 ft door $225
  9X7  = $350
10 x 7 = $400		  9X10 =   $400
10 x 10 = $ 450

window sizes available

additional bow braces 24 " = $25 per bow

 30 inches wide by 27 inches tall $125

Units can be ordered longer than 36 feet by using multiple units and placing them end to end and overlapping the metal sheets on the roof. You loose a minimum of 1 foot due to the overlapping. (prefer 2 ft overlap)
example: using (2) 20 x 24  units end to end will achieve an overall length of 46 feet in length. If installed on anything other than concrete slab, this Dealer recommends adding concrete piers after the installation. Our sales staff can explain.

Prices are subject to change and must be approved by installing yard.

 

 

 

 

 

 

 

 

disclaimer and policy